Surgical Masks Flat Face Masks Medical sterile mask 3-Layer

Surgical Masks Flat Face Masks Medical sterile mask

A surgical mask is a loose-fitting, disposable device that creates a physical barrier between the mouth and nose of the wearer and potential contaminants in the immediate environment. Surgical masks are regulated under 21 CFR 878.4040. Surgical masks are not to be shared and maybe labeled as surgical, isolation, dental, or medical procedure masks. They may come with or without a face shield. These are often referred to as face masks, although not all face masks are regulated as surgical masks.

Surgical masks are made in different thicknesses and with different abilities to protect you from contact with liquids. These properties may also affect how easily you can breathe through the face mask and how well the surgical mask protects you.

If worn properly, a surgical mask is meant to help block large-particle droplets, splashes, sprays, or splatter that may contain germs (viruses and bacteria), keeping it from reaching your mouth and nose. Surgical masks may also help reduce exposure of your saliva and respiratory secretions to others.

While a surgical mask may be effective in blocking splashes and large-particle droplets, a face mask, by design, does not filter or block very small particles in the air that may be transmitted by coughs, sneezes, or certain medical procedures. Surgical masks also do not provide complete protection from germs and other contaminants because of the loose fit between the surface of the face mask and your face.

Surgical masks are not intended to be used more than once. If your mask is damaged or soiled, or if breathing through the mask becomes difficult, you should remove the face mask, discard it safely, and replace it with a new one. To safely discard your mask, place it in a plastic bag and put it in the trash. Wash your hands after handling the used mask.

 

We offer Surgical Masks Flat Face Masks Medical sterile mask at wholesale price, contact us at info@www.plcskit.com for details.

All of these respirators have protection factors of at least 10 in the countries listed below, as outlined in the standards and guidance documents specified.

Use of respirators approved under standards used in other countries that are similar to NIOSH-approved N95 respirators

Country Performance Standard Acceptable product classifications Standards/Guidance Documents Protection Factor ≥ 10
Australia AS/NZS 1716:2012 P3

P2

AS/NZS 1715:2009 YES
Brazil ABNT/NBR 13698:2011 PFF3

PFF2

Fundacentro CDU 614.894 YES
China GB 2626-2006 KN 100 KP100

KN95 KP95

GB/T 18664—2002 YES
Europe EN 149-2001 FFP3

FFP2

EN 529:2005 YES
Japan JMHLW-2000 DS/DL3

DS/DL2

JIS T8150: 2006 YES
Korea KMOEL-2017-64 Special

1st

KOSHA GUIDE H-82-2015 YES
Mexico NOM-116-2009 N100, P100, R100

N99, P99, R99

N95, P95, R95

NOM-116 YES
US NIOSH Requirements NIOSH approved
42 CFR 84
N100, P100, R100
N99, P99, R99
N95, P95, R95
OSHA 29CFR1910.134 YES
Editor

Share
Published by
Editor

Recent Posts

VX3x Direct Operated 3 Port Solenoid Valve for Manifold

SMC Direct Operated 3 Port Solenoid Valve VX3x for Manifold Condition: New, Original or Alternate.

2 years ago

ZSE20C(F) Digital Vacuum Sensor 3 Screen 2 Output + Analog IP65

SMC Digital Vacuum Sensor ZSE20CF ZSE20C 3 Screen 2 Output + Analog IP65 Condition: New,…

2 years ago

VX3x Direct Operated 3 Port Solenoid Valve for Manifold

SMC Direct Operated 3 Port Solenoid Valve VX3x for Manifold Condition: New, Original or Alternate.

2 years ago

ITV1000 2000 3000 Flat Bracket Assembly

SMC Flat Bracket Assembly ITV1000-2000-3000 Condition: New, Original or Alternate.

2 years ago

ZSE20C(F)-L Digital Vacuum Sensor 3 Screen IP65 with IO-Link

SMC Digital Vacuum Sensor ZSE20CF-L ZSE20CL 3 Screen IP65 with IO-Link Condition: New, Original or…

2 years ago

ZSE20C(F) Digital Vacuum Sensor 3 Screen 2 Output + Analog IP65

SMC Digital Vacuum Sensor ZSE20CF ZSE20C 3 Screen 2 Output + Analog IP65 Condition: New,…

2 years ago

This website uses cookies.