Rodless Cylinder CY3R-N Magnetically Coupled Direct Mount without Switch Rail

The CY3R Cylinder – Magnetically Coupled uses industrial strength magnets
located in the piston and external carriage to form a single unit that will
travel when actuated with air pressure. The CY3R series has resin based
lube retainers installed on the dust seal to more evenly distrubute
lubricant for a reduction in minimum operating pressure. 70% longer wear
rings will distribute a side load over a larger contact area for improved
bearing performance. Please note the CY3R-N must be used with an external
guide to support the load.

– Bore sizes: 6, 10, 15, 20, 25, 32, 40, 50, 63 mm
– Stoke lengths: 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600,
700, 800, 900, 1000, 1200, 1500, 2000 mm
– Minimum operating pressure: 0.12 ~ 0.16 MPa (17 ~ 23 psi)
– Direct mount type
– Speed: 50 ~ 500 mm/sec.
– Auto switch capable
– Option include: High Speed, 1500 mm/sec. (X160), Hard Chrome Plating
(X322)

Download CY3R-N Datasheet by click the link Datasheet.