Rodless Cylinder NCY3B Magnetically Coupled (Inch Stroke)-Basic Type

The NCY3B Rodless Cylinder – Magnetically Coupled uses industrial strength
magnets located in the piston and external carriage to form a single unit
that will travel when actuated with air pressure. The NCY3B series has
resin based lube retainers installed on the dust seal to more evenly
distribute lubricant for a reduction in minimum operating pressure. 70%
longer wear rings will distribute a side load over a larger contact area
for improved bearing performance.

– Bore sizes (nominal): 1/4″, 3’8″, 5/8″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″,
2-1/2″
– Stroke length: 2″, 3″, 4″, 5″, 6″ 8″, 10″, 15″, 20″, 25″, 30″, 40″,
60″, 80″
– Minimum operating pressure: 17 ~ 23 psi (0.12 ~ 0.16 MPa)
– Speed: 2 ~ 20 inch/sec.
– Options include: Heat Resistance 302°F (XB6), Low Speed, 0.6 ~ 2.0
inch/sec. (XB9), Ultra Low Speed, 0.3 ~ 2.0 inch/sec. (XB13), High Speed,
59.0 inch/sec. (X160), Hard Chrome Plating (X322)

Download NCY3B Datasheet by click the link Datasheet.