25A-CY3R(G) Magnetically Coupled Rodless Cylinder Direct Mount Type

The CY3R Rodless Cylinder – Magnetically Coupled uses industrial strength
magnets located in the piston and external carriage to form a single unit
that will travel when actuated with air pressure. The CY3R series has resin
based lube retainers installed on the dust seal to more evenly distribute
lubricant for a reduction in minimum operating pressure. 70% longer wear
rings will distribute a side load over a larger contact area for improved
bearing performance. Please note the CY3R must be used with an external
guide to support the load.

The 25A- series variations are designed using material compatible with
secondary battery applications and are able to be used in low dew point
environments. The variations eliminate copper (Cu) and zinc (Zn) material
where possible, making them compatible with secondary battery manufacturing
for electronics, automotive, and other vehicle types.

– Bore sizes (mm): 6, 10, 15, 20, 25, 32, 40, 50, 63
– Stroke lengths (mm): 50, 100, 150, 200, 250, 300, 350, 400, 450, 500,
600, 700, 800, 900, 1000
– Minimum operating pressure: 0.12 ~ 0.16 MPa (17 ~ 23 psi)
– Direct mount type
– Auto switch capable
– Series 25A-CY3R is compatible with secondary battery applications

Download 25A-CY3RG 25A-CY3R Datasheet by click the link Datasheet.