Description
The ISE70G pressure sensors provide continuous quantitative values, as well
as switched digital outputs when pressure set points are met. Compatible
fluids include any non-corrosive liquid or gas. 6 pressure ranges are
offered up to 50 MPa. This sensor is also IO-Link compatible. Sensor
information, such as identity, functional state, cable connection, and
current or switch values can be set or monitored remotely through an
IO-Link master, and connected to a fieldbus network. The ISE70G series is
designed for abusive environments that may also include splashed coolant,
lubricants, or grime. Electronics are packaged in a metal housing, while
the piping connection is a stout lug with female threads, which together
protect the sensor against accidental collisions with other objects in the
area. A smooth display face with membrane type buttons avoids
contamination from grit and sticky residue that could clog or jam raised
rubber buttons. The display is angled and can rotate 336 degrees, to
permit easy reading when indirectly mounted. The main screen shows
instantaneous values in red or green, while the sub screen settings appear
in orange. Switch indicators will also light when set points are reached.
– Pressure ranges: 1, 2, 5, 10, 16 and 50 MPa
– 3-screen, 3-color display with switch indicators
– 4-pin M12 connector
– IP67 Ingress Protection rating
– 1/4 Rc, NPT, or G port
– 2 digital switch outputs with selectable NPN/PNP
– UL/CE/RoHS standards
Download ISE70G Datasheet by click the link Datasheet.
